2026 Ford Expedition Active in Hamilton, MT
The 2026 Ford Expedition Active is a full-size SUV engineered to support substantial passenger capacity, configurable cargo space, trailer operation, and connected travel. Its three-row cabin can accommodate up to eight occupants when equipped with the available second-row bench seat. A 3.5-liter EcoBoost® V6 engine, 10-speed automatic transmission, and independent front and rear suspension form the basis of its performance. Standard display and camera technologies give the driver access to important information and useful exterior views. Available four-wheel drive, cargo-management equipment, connectivity systems, and driver-assistance features broaden the model’s functional capabilities.
Powertrain and driving capability
The 2026 Ford Expedition Active combines turbocharged power with a transmission and drivetrain designed for varied passenger, cargo, and towing demands. Rear-wheel drive comes standard, while Intelligent 4WD with Terrain Management System™ is available. The powertrain delivers the output needed to move a large three-row SUV while supporting its utility functions. Independent front and rear suspension systems contribute to stability, cornering, and controlled handling. Available continuously controlled damping can further refine the vehicle’s response to road imperfections.
EcoBoost® V6 performance
The 3.5-liter EcoBoost® V6 engine uses twin air-to-air intercooled turbochargers to provide responsive performance. Direct injection helps the engine produce 400 horsepower, supplying substantial output for acceleration and load management. The engine also generates 480 lb-ft of torque, which supports the 2026 Ford Expedition’s trailer-towing capability. The turbochargers compress incoming air, while the intercooling system reduces the temperature of that air before it reaches the engine.
A 10-speed automatic transmission with SelectShift® capability manages power delivery from the EcoBoost® engine. Its broad selection of ratios helps the vehicle respond to changing speed, load, and towing requirements. Lower ratios support initial acceleration and the movement of heavier loads, while the remaining ratios provide additional flexibility as road speed changes. SelectShift® capability gives the driver more direct control over gear selection when desired.
Drivetrain and suspension engineering
Rear-wheel drive is standard on the 2026 Ford Expedition Active. This drivetrain configuration directs engine power to the rear wheels and places the Active among the available 4×2 2026 Ford Expedition models. Intelligent 4WD with Terrain Management System™ is available for drivers who need power distributed through a four-wheel-drive system. Terrain Management System™ includes six selectable drive modes that help adapt vehicle operation to different conditions. The availability of both drivetrains allows the Active model to address different traction and capability requirements.
Independent front and rear suspension systems support the 2026 Ford Expedition Active’s handling, cornering, and stability. This layout allows the wheels to respond individually to changes in the driving surface. The design helps the chassis manage vehicle movement across paved roads and uneven surfaces. Available continuously controlled damping can help reduce jarring impacts caused by road imperfections. By adjusting damping behavior, the system adds another layer of control to the suspension’s response.
Passenger space and interior technology
The cabin of the 2026 Ford Expedition Active emphasizes flexible passenger accommodation, accessible storage, and clearly presented vehicle information. Its three-row design can seat up to eight people when fitted with the available power-folding second-row bench. The seating configuration can also be adjusted to create additional cargo room when fewer passenger positions are required. A standard 24-inch panoramic display places driving information, maps, and media within the driver’s forward field of view. Available cabin features further support storage access, passenger comfort, and interior visibility.
Flexible three-row seating
An available power-folding 40/20/40 second-row bench provides seating for up to eight occupants in the 2026 Ford Expedition Active. Its divided construction allows separate portions of the seat to fold, making it possible to balance passenger and cargo requirements. The bench also includes a tip-and-slide feature that improves access to the third row. Power-folding functionality reduces the manual effort needed to change the second-row layout.
The available Flex Powered Console adds another adjustable component to the interior. It can slide forward to create more storage space and increase aisle room. The console can also move rearward to place its cupholders within easier reach of second-row passengers. This powered adjustment lets occupants change the console’s position to suit the cabin’s current use.
Display and cabin visibility
A standard 24-inch panoramic display presents important information in a wide, configurable format. The system can show driving data, maps, music, and other vehicle information at eye level. This arrangement helps the driver view several types of information without relying on separate, widely spaced displays. Configurable content also allows the display to emphasize the information that is most relevant during a particular drive. The panoramic screen serves as a central element of the 2026 Ford Expedition Active’s digital cabin.
An available panoramic Vista Roof® increases the amount of natural light entering the first and second rows. The system contains two panels positioned over those seating areas. Its front panel can slide rearward to provide an open-air driving experience. The fixed second panel functions as a skylight for passengers seated farther back in the cabin. This two-panel design gives the front and rear portions of the roof distinct functions.
Dimensions, cargo capacity, and towing
The standard-length 2026 Ford Expedition combines full-size exterior dimensions with cargo space that changes according to the seating arrangement. It measures 209.9 inches long and 84.6 inches wide with the sideview mirrors folded. Its width increases to 94.6 inches when the mirrors remain extended. These dimensions provide relevant information for parking, garage clearance, and placement in confined areas. Inside, the folding second and third rows allow the cargo area to expand as passenger capacity decreases.
Configurable cargo volume
The standard-length 2026 Ford Expedition provides up to 108.5 cubic feet of optimized cargo volume behind the first row when the rear seating areas are folded. With the second row in use and the third row folded, the vehicle supplies 69.9 cubic feet behind the second row. When all three rows remain available for passengers, 22.9 cubic feet of cargo room sits behind the third row. These capacities allow the interior to support different combinations of people and equipment. The folding seating system gives occupants a direct method of changing the usable space.
The multifunction Ford Split Gate expands the utility of the rear cargo opening. It uses powered upper and lower gates that can be configured to accommodate larger items such as kayaks and lumber. The lower gate can serve as a loading platform when moving items into or out of the cargo area. It can also function as a tailgate seat and has a 500-pound capacity. Available Open On Approach can operate the Split Gate automatically when the key fob is present and the user approaches the vehicle.
An available Cargo Tailgate Manager adds more functions to the rear cargo area. It can operate as a shelf or table and has a 35-pound capacity in that role. The component can also serve as a backrest when occupants use the lower gate as a seat. Available 360-degree Zone Lighting can illuminate the area around the vehicle through lights positioned in the headlamps, roof rails, interior liftgate, and spoiler on select models. These systems make the rear of the 2026 Ford Expedition useful for loading, organizing equipment, or creating a stationary work surface.
Towing support
The 2026 Ford Expedition lineup offers different towing limits based on drivetrain and equipment. Properly equipped 4×2 models can tow up to 6,000 pounds, which applies to the rear-wheel-drive configuration offered on the Active model. Select 4×4 2026 Ford Expedition configurations can provide a maximum towing capacity of up to 9,600 pounds with the specified Heavy-Duty Trailer Tow Package. The EcoBoost® engine’s 480 lb-ft of torque contributes to its ability to move a trailer from a stop. Its 10-speed transmission supports towing by supplying a wide range of ratios for acceleration, changing speeds, and managing loads.
Available Pro Trailer Hitch Assist™ and Pro Trailer Backup Assist™ provide additional technology for specific trailering tasks. Pro Trailer Hitch Assist™ is designed to assist during the process of aligning the vehicle with a trailer hitch. Pro Trailer Backup Assist™ supports the driver while maneuvering a connected trailer in reverse. These systems operate as driver-assistance features and do not replace the driver’s attention or control.
Connectivity and driver-assistance systems
The 2026 Ford Expedition Active incorporates technology for navigation, communication, personalization, maneuvering, and collision awareness. Its digital systems connect the panoramic display with compatible mobile devices, integrated services, cameras, and vehicle sensors. Some features present information or warnings, while others can provide steering or braking assistance under defined conditions. Standard equipment includes a 360-Degree Camera system for viewing the area around the SUV during parking and maneuvering. Additional available systems expand the vehicle’s connectivity, security, and driver-support capabilities.
Connected features and personalization
The Ford Digital Experience integrates compatible digital functions and familiar services into the vehicle environment. Wireless Apple CarPlay® compatibility provides access to Apple Maps and supported third-party navigation applications through the in-vehicle display. Android Auto™ compatibility supports functions such as navigation and text messaging through the center display. These systems allow occupants to use compatible mobile features without relying entirely on the phone’s screen. Their wireless operation also reduces the need for a physical connection during routine use.
Advanced Personalization can retain settings for the driver’s seat, steering wheel, and exterior mirrors when the vehicle includes the necessary equipment. The system can link keys and phones to individual preferences. A user can also sign in to Google™ to access saved Google Maps™ destinations and tailored Google Assistant™ results. This functionality reduces the need to reconfigure supported settings every time a linked driver enters the vehicle. It also brings stored navigation information into the 2026 Ford Expedition’s digital interface.
The available Ford Connectivity Package provides a built-in 5G Wi-Fi hotspot that can support up to 10 devices. Connected devices can remain within a 50-foot radius of the vehicle. Integrated Google Maps supplies navigation directly through the vehicle without requiring a connected phone. When the 2026 Ford Expedition is parked, supported streaming and gaming functions can operate through the center display. An available headrest-mounted digital device holder also gives second-row passengers a dedicated place to position a tablet.
Available Phone As A Key functionality allows a compatible phone to perform key-fob functions. Through the Ford app, users can also raise or lower the windows and operate the tailgate. The available Ford Security Package can provide customized Theft Alerts for attempts to access, start, move, or factory-reset the vehicle. Start Inhibit can remotely prevent the 2026 Ford Expedition from starting, even if an authorized key is nearby.
Camera and collision-assistance technologies
The standard 360-Degree Camera system uses front and rear cameras to provide views around the 2026 Ford Expedition. These views help the driver assess the SUV’s position while parking or maneuvering in limited spaces. The system is particularly relevant for a vehicle with a standard length of 209.9 inches and an overall width of 94.6 inches with the mirrors extended. Camera views supplement direct observation by showing areas that may be difficult to see from the driver’s seat. The driver must still remain attentive and verify the vehicle’s surroundings.
Pre-Collision Assist® with Automatic Emergency Braking can detect a potential frontal collision involving a vehicle or pedestrian. If the sensors identify a possible impact, the system can provide visual and audible warnings. It can also apply the brakes when necessary to help reduce the severity of a collision or avoid it in some circumstances. Blind Spot Assist uses an illuminated symbol in the sideview mirror to notify the driver when a vehicle occupies the adjacent area. Resistive steering torque can provide additional feedback when the 2026 Ford Expedition begins to leave its lane.
Reverse Brake Assist monitors the area behind the SUV while the driver backs up. The system can issue an alert when it detects a potential collision involving a pedestrian, vehicle, or object such as a shopping cart. It can automatically apply the brakes if the situation requires intervention. This function works with the camera system to provide both visual information and active braking support during reverse movement. The driver remains responsible for monitoring the area and controlling the vehicle.
Available Adaptive Cruise Control with Stop-and-Go and Lane Centering uses cameras and radar to respond to traffic conditions. It can maintain a selected distance from the vehicle ahead and bring the 2026 Ford Expedition to a complete stop when necessary. The system can resume the selected speed when traffic begins moving again. Lane Centering can scan road markings and provide steering assistance to help keep the vehicle positioned within its lane. These functions support highway travel while requiring the driver to remain engaged.
Visit Quality Motors of Hamilton to Schedule a Test Ride
Schedule a test drive at Quality Motors of Hamilton in Hamilton, MT, to evaluate the 2026 Ford Expedition Active from the driver’s seat. Our team can help demonstrate its EcoBoost® performance, 10-speed transmission, available four-wheel drive, and independent suspension. We can also review its panoramic display, flexible seating, cargo functions, connected technology, and camera views. A test drive provides an opportunity to assess the SUV’s comfort, handling, visibility, and driver-assistance features in operation. Contact our team to arrange a visit and examine the 2026 Ford Expedition Active’s functional capabilities in person.